Shop All

  • Don Barrow DB6+ Map Magnifier -  the only Map Magnifiers with interchangeable Graticule Baseplates Don Barrow DB6+ Map Magnifier

    Don Barrow DB6+ Map Magnifier

    Don Barrow DB6+ Map Magnifier with interchangeable Graticule Baseplates110mm Crystal Glass Lens, 12 volt lighting unit DB6+ Features Ajustible Brightness with  Intergrated On/Off Switch 1 White Tungsten Bulb 1:50,000 Romer Baseplate 'Capt...

    £101.70 inc. VAT
    £84.75 ex. VAT
    Choose Options
  • Navigators Clipboard

    Navigators Clipboard

    A must have for all navigators, the DB Navigators clipboard, with Hints and Tips, Hanging loop and strong steel retaining clip at the top. A sping penclip will also fit onto the board

    £8.00 inc. VAT
    £6.67 ex. VAT
    Add to Cart
  • Navigators Starter Kit bits

    Navigators Starter Kit bits

    Navigators Starter kit bits and bobs Included Starter Kit Items 1 x Don Barrow 1:50,000 Romer 2 x 2B Pencils 2 x Biro Pen 3 x Coloured Highlighter Pens 1 x Pencil Sharpener 1 x Staedtler Rubber 1 x 3 way spring Pencil Holder 1 x Oxford Protractor 1...

    £16.08 inc. VAT
    £13.40 ex. VAT
    Add to Cart
  • Don Barrow Head Torch Don Barrow Head Torch

    Head Torch

      Features: Headlamp can be angled down up to 90 degree. Elastic headband. LED life 10,000 hours 3 modes: high/ low/ strobe   Specification: LED:  12 COB Light color: White Switch type: Button (on-switch mode-off) Power by: 3 x AAA battery (not...

    £6.49 inc. VAT
    £5.41 ex. VAT
    Add to Cart
  • RallyTimer Mounting Back Plate (BR32BK)

    RallyTimer Mounting Back Plate (BR32BK)

    This mounting plate fixes to the back of our Timer V2 (BR32V2), and also previous version Rally Timer PLUS (BR32+), using the existing screws to give the Rally Timer Mounting Flanges identical to the International range of tripmeters. Dimensions: 98mm x...

    £12.00 inc. VAT
    £10.00 ex. VAT
    Add to Cart
  • Brantz Pulse Doubler (BR52)

    Brantz Pulse Doubler (BR52)

    The Brantz Sensor Pulse Doubler is designed to be fitted to vehicles with a low number of pulses from the sensor producing a low calibration figure. A figure below 499 (or 999 on a Laser 3) can benefit in accuracy by adding a Pulse Doubler...

    £65.21 inc. VAT
    £54.34 ex. VAT
    Add to Cart
  • Brantz (European) M18 Gearbox Sensor (BR4) Brantz (European) M18 Gearbox Sensor (BR4)

    Brantz (European) M18 Gearbox Sensor (BR4)

    Most European manufacturers (Ford/GM/Vauxhall/VW/Skoda/Lada/Fiat) standardised their gearbox outputs to accept a M18x1.5mm thread with a square pin drive. This unit can be fitted either at the gearbox or speedometer end of your speedometer cable...

    £39.62 inc. VAT
    £33.02 ex. VAT
    Add to Cart
  • Brantz Brantz Wheel Sensor - 4mm (BR2A-4mm) Brantz Brantz Wheel Sensor - 4mm (BR2A-4mm)

    Brantz Brantz Wheel Sensor - 4mm (BR2A-4mm)

    The BR2A-4mm is a 12mm threaded device that works in exactly the same way as the standard version (BR2A), however it is specially designed with a larger sensing distance of 4mm - ideal for positionings where there might be slight movement tolerance such...

    £37.07 inc. VAT
    £30.89 ex. VAT
    Add to Cart
  • Brantz High Temperature Wheel Sensor (BR2A-HT) Brantz High Temperature Wheel Sensor (BR2A-HT)

    Brantz High Temperature Wheel Sensor (BR2A-HT)

    The BR2A-HT is a 12mm threaded device that works in exactly the same way as the standard version (BR2A), however it is specially designed for High Temperature situations such as extremely hot climates or courses with increased levels of braking. The...

    £46.38 inc. VAT
    £38.65 ex. VAT
    Add to Cart
  • Brantz Power Conditioner (BR21)

    Brantz Power Conditioner (BR21)

    Essential for 6v systems The Brantz Power Conditioner has been designed to provide a reliable voltage source for Brantz International Rally Meters and Retrotrips. It is essential when these instruments are connected to a road vehicle having either a 6V...

    £47.41 inc. VAT
    £39.51 ex. VAT
    Add to Cart